Mold is Not Cool, But Hope Your A/C Is!

There have been a few days with temperatures in the 80's already this spring. Soon, the NC heat and humidity will settle in for the summer and air conditioners will be working hard to keep up.

The proper sizing, design, installation and maintenance of your HVAC system is essential to help control indoor mold. Problems in any of these areas can cause issues with humidity levels or condensation, both of which are key moisture sources for mold growth in your home.

Your HVAC system and its associated ductwork also provides a vehicle to transport mold spores throughout your home once a problem starts. A little preventative maintenance now will help ensure that your systems operates effectively throughout the summer and does not contribute to indoor mold growth.

Remember that HVAC contractors are busiest during peak summer heat and winter cold periods. Schedule a preventative maintenance check of your cooling system now to ensure you are ready when the temperatures start to rise.

The Energy Star website offers these tips for homeowners to ensure your HVAC contractor is keeping your cooling system operating at peak performance:

1) Clean evaporator and condenser air conditioning coils. Dirty coils reduce the system's ability to cool your home and cause the system to run longer, increasing energy costs and reducing the life of the equipment.

2) Check the central air conditioner's refrigerant level and adjust if necessary. Too much or too little refrigerant will make your system less efficient increasing energy costs and reducing the life of the equipment.

3) Clean and adjust blower components to provide proper system airflow for greater comfort levels. Airflow problems can reduce your system's efficiency by up to 15 percent.

4) Check thermostat settings to ensure the cooling and heating system keeps you comfortable when you are home and saves energy while you are away.

5) Tighten all electrical connections and measure voltage and current on motors. Faulty electrical connections can cause unsafe operation of your system and reduce the life of major components.

6) Lubricate all moving parts. Parts that lack lubrication cause friction in motors and increases the amount of electricity you use.

7) Check and inspect the condensate drain in your central air conditioner, furnace and/or heat pump (when in cooling mode). A plugged drain can cause water damage in the house and affect indoor humidity levels. Air Matters reminds you that this can lead to mold growth.

8) Check controls of the system to ensure proper and safe operation. Check the starting cycle of the equipment to assure the system starts, operates, and shuts off properly.

And don't forget to change your air filters regularly!

Air Matters LLC has performed mold testing services in the Raleigh NC area since 2002. The owner, Renee D. Ward, has over 25 years of safety and environmental experience and holds both her Bachelors and Masters degrees in engineering. Renee is also a member of the American Industrial Hygiene Association and the Indoor Air Quality Association. You may contact Air Matters at (919) 961-2221 or info@AirMattersMoldTesting.com.

Air Matters LLC is just days into starting our 10th year in business – and it has been the busiest first week of January in company history. With the exception of one project, all of our testing this week has been as a result of sudden leaks that occurred in homes while people were away for the holidays.

State Farm Insurance estimates that damage to homes from ruptured pipes affects 250,000 families in the United States each year. Appliance malfunctions, particularly from washing machines and ice makers are other common culprits. What do you need to watch out for to help minimize the risk of coming home to a disaster?

Frozen Pipes

Insufficient or nonexistent insulation is the number one cause of frozen and burst pipes. Pipes, especially those that run along exterior walls, must be properly insulated to avoid freezing. Many older homes lack proper insulation and must be updated, while some homes in the southern United States lack insulation around pipes altogether.

“When pipes freeze, water expands and exerts over 2,000 pounds of force, causing cracks—regardless if the pipe is made of plastic, copper or steel,” says Ray VinZant, a plumber of 42 years and plumbing engineer for Roto-Rooter Group, Inc based in Cincinnati.

Washing Machine Hoses

According to State Farm Insurance, washing machine hose failures cause about $150 million in damage to homes in the United States and Canada each year. To reduce the chances that your hoses will fail, State Farm recommends that you:

• Make sure there are at least four inches (or 11 centimeters) between the water connection and the back of the washing machine. This space will help reduce the chances that the hose will kink.
• Regularly inspect your washing machine hoses. Replace hoses every 3-5 years as part of a proactive maintenance program.
• Keep track of the last time you inspected the hoses by jotting the "inspected" date on the hose or a magnet attached to the washing machine.
• Check that hose connections are secure, including the drain hose.
• Make sure everyone in your household knows where the water shutoff valve is and how to open and close it. Shut off water at valves if you will be away from your home for several days or longer.
• Consider installing or having a professional plumber install a single-handled valve that makes it easier to turn off the water supply to your washing machine.

Ice Maker Lines

Farm Bureau Insurance suggests that you consider the following tips to minimize the risk of your refrigerator or ice maker leaking:

• Proper installation of the icemaker supply line hose is important to avoiding water damage.
• Tightly connect the hose to the valve. Avoid over-tightening.
• Inspect the hose every six months. Ensure the valve connection is secure and check for kinks. If kinks are present, replace the hose.
• Leave a three to four inch space between the back of the refrigerator and the wall to prevent the hose from crimping.
• Locate the water shut-off valve. Inspect the valve every six months to make sure the water supply will shut off.

Sometimes despite your best preventative efforts, leaks sometimes still occur. If you have a water intrusion, shut off the water supply source immediately. Contact a water damage professional to remove standing water and all moist materials to minimize the risk of mold growth.

What Does Chinese Drywall Have To Do With Mold?

This fall, the U.S. Consumer Product Safety Commission (CPSC) has confirmed that over 6.2 million sheets of Chinese drywall have been imported into the United States during the past five years. The actual numbers are certain to be much higher. Although some of the sheetrock is clearly marked "Made in China", other shipments may contain no markings at all. Chinese drywall has been distributed all over the country, but the majority of the product has been found in Florida and Louisiana.

Signs and Symptoms
The Chinese drywall in question contains sulfur, which is not present in wallboard produced in the U.S. In addition, the CPSC found that the Chinese product contained compounds normally found in acrylic paints and 10 times more Stontium (an alkaline earth metal that turns yellow when exposed to air) than American drywall. Residents with Chinese drywall complained of rotten egg smells throughout their homes and reported such health problems as asthma, headaches, coughing, and insomnia.

Where Damage Occurs
The sulfur, increased Strontium levels, and other compounds in the Chinese drywall have led to failures of air conditioning coils, corrosion of electrical wiring, and corrosion of plumbing fixtures - particularly copper pipes and fittings.

Resulting Mold Issues
When corrosion of HVAC system components, plumbing systems, or electrical wiring occurs, this can result in failure of that system. Back-up of condensation and leaks are common with system failures and can result in water or moisture intrusion into the home. In turn, this leads to an increased potential for fungal growth inside the home, particularly when the water or moisture intrusion goes undetected for some period of time.

If You Suspect Chinese Drywall In Your Home
It is difficult to performs inspections or testing that positively identify where Chinese drywall is present in a home. Some disassembly of walls is required, and then positive identification is still not always possible. A special coalition has been formed in Florida to help builders, contractors, and home owners deal with the removal of Chinese drywall. For more information on the coalition and their guidance, go to www.chinesedrywallprotocol.org.

Air Matters has performed mold inspection and testing services in the Raleigh NC area since 2002. The owner, Renee Ward, has over 22 years of safety and environmental experience and holds both her Bachelor of Science and Masters degrees in engineering. Renee is also a member of the American Industrial Hygiene Association and the American Indoor Air Quality Council. Contact Air Matters at (919) 870-6748.